Customer Support
Search:     Advanced search

SureForce with Kinze Setback

Article ID: 2168
Last updated: 26 Feb, 2019
Revision: 2
Views: 251

Ag Leader SureForce is supported on Kinze 3000 series puller row units running the four inch setback without requiring any additional hardware.

The pictures on the left side show the standard Kinze 3000 SureForce install. The pictures on the right show SureForce installed with the 4” setback. Notice the only changes are the angle of the SureForce actuator.

Note:  Setback kits that are 6 inches are not supported.  There is not enough distance for the actuator to fully extend and put the pin in the lower bracket.  

Content last reviewed on: 2/26/19
Reviewed by: LM