Customer Support
Search:     Advanced search

Legacy Harvest

Article ID: 1692
Last updated: 15 Aug, 2016
Revision: 1
Views: 2234

Ag Leader Technology was founded in 1992 with yield monitoring as our first product and today we provide the most widely used grain yield monitoring technology in the world. The primary components are the moisture sensor in the elevator mount unit (EMU) and the mass flow sensor at the top of the clean grain elevator.

The instructions on this page refer to harvesting grain using our PF Series monitors and the Yield Monitor 2000. For instructions related to CAN Bus combine kits, please refer to Grain Harvest.

Initial Release Date: 1992

Manuals / Quick Reference Guides

Compatible Displays Description of Documentation
PF Series (PF 3000 / PF 3000 Pro / PFadvantage) See the Harvest & Application Manual and the Grain Harvest Mode quick reference.
Yield Monitor 2000 See the Yield Monitor 2000 Manual or Quick Reference.

Combine Kit Installation Instructions

Installation instructions for legacy grain and grass seed combine kits are listed below, along with the initial calibration number sheets.

Jump to a section below:

Grain Combine Kit Installation (North America)

Combine Models Combine Kit PN Installation Instructions Initial Calibration Notes
Case IH
1420 / 1620 2005201 2005200-1 Initial Cal
1440 / 1460 2005202 2005200-1 Initial Cal
1480 2005203 2005200-1 Initial Cal
1640 / 1644 / 1660 / 1666 2005204 2005200-2 Initial Cal
1680 / 1688 2005205 2005200-2 Initial Cal
2144 / 2166 / 2344 / 2366 (1994-1995) 2005206 2005200-3 Initial Cal
2144 / 2166 / 2344 / 2366 (1996+) 2005210 2005200-3 Initial Cal
2188 (1994-1995) 2005207 2005200-3 Initial Cal
2188 (1996-1999) 2005212 2005200-3 Initial Cal
2388 / 2377 / 2577 / 2588 and 2X88 (1996+) 2005212 2005200-3 Initial Cal
7010 / 8010 2005214 2005200-5 Initial Cal
Challenger
660 / 670 2005360 2005300-11 Initial Cal
CLAAS
96 2005501 2005300-7 Initial Cal
98 2005354 2005300-7 Initial Cal
106 / 108 2005355 2005300-7 Initial Cal
114 / 116 / 218 / 228 2005502 2005300-7 Initial Cal
Gleaner
A65 / A75 2005360 2005300-11
K2 / K3 / F2 / F3 2005301 2005300-1
M2 / L2 2005302 2005300-2
Early M3 / L3 2005302 2005300-2
Late M3 / L3 2005303 2005300-2
Early N5 / N6 / N7 2005304 2005300-3 Initial Cal
Late N5 / N6 / N7 2005305 2005300-3 Initial Cal
R5 / R6 / R7 / R60 / R70 2005305 2005300-3 Initial Cal
R40 / R50 2005306 2005300-3 Initial Cal
Early R42 / R52 2005307 2005300-4 Initial Cal
Late R42 / R52 2005309 2005300-4 Initial Cal
R62 / R72 / C62 2005309 2005300-4 Initial Cal
R55 / R65 / R75 2005310 2005300-10 Initial Cal
John Deere
3300 / Early 4400 2005101 2005100-1 Initial Cal
4420 / Late 4400 2005102 2005100-1 Initial Cal
4425 / 4435 2005103 2005100-2
Early 6600 2005104 2005100-1 Initial Cal
Late 6600 2005105 2005100-1 Initial Cal
6620 2005109 2005100-3 Initial Cal
Early 7700 2005106 2005100-1 Initial Cal
Late 7700 2005107 2005100-1 Initial Cal
7720 2005111 2005100-3 Initial Cal
Early 8820 2005112 2005100-3 Initial Cal
Late 8820 2005114 2005100-3 Initial Cal
Early 9400 / 9500 2005128 2005100-15 Initial Cal
9400 / 9410 / 9500 / 9510 2005122 2005100-7 Initial Cal
Early 9600 2005129 2005100-15 Initial Cal
9600 / 9610 2005123 2005100-7 Initial Cal
9x50 2005124 2005100-14 94509550 | 9650 | 9750
9x60 2005127 2005100-14 9560 | 9660 | 9760 | 9860
9x70 2005132 2005100-14 Initial Cal
Lexion
450 / 460 / 465 / 470 / 480 / 485 2005509* 2005500-4 Initial Cal *30mm bearing lower adjuster
450 / 460 / 465 / 470 / 480 / 485 2005510* 2005500-4 Initial Cal *35mm bearing lower adjuster
560 / 565 and 570 / 575 (2005) 2005511 2005500-4 Initial Cal
570 / 575 (2006) 2005512 2005500-5 Initial Cal
560R 2005513 2005500-4 Initial Cal
580 / 585 / 590 2005512 2005500-5 Initial Cal
New Holland
TX 66 / 68 2005410 2005400-2 Initial Cal
TC 57 / 59 2005411 2005500-4 Initial Cal
TR 70 / 75 / 85 2005401 2005400-1 Initial Cal
TR 95 2005402 2005400-1 Initial Cal | 2001 Model SAmerica Cal
TR 86 / 87 2005403 2005400-1 Initial Cal
TR 96 / 97 2005404 2005400-1 Initial Cal | 2001 Model SAmerica Cal
TR 88 2005405 2005400-1 Initial Cal
Early TR 89 2005406 2005400-1 Initial Cal | 2001 Model
TR 89 (YM Ready) 2005408 2005400-3 Initial Cal | 2001 Model
TR 98 2005406 2005400-1 Initial Cal | 2001 Model SAmerica Cal
Early TR 99 2005407 2005400-1 Initial Cal | 2001 Model
TR 99 (YM Ready) 2005409 2005400-3 Initial Cal | 2001 Model
CX 820 / 840 / 860 / 880 2005412 2005400-5 Initial Cal
CR 9xO / 90x0 2005412 2005400-5 Initial Cal
Massey Ferguson
Early 550 2005350 2005300-5
Late 550 2005351 2005300-5
750 / 760 2005352 2005300-6 Initial Cal
850 / 860 2005356 2005300-8 Initial Cal
8450 2005354 2005300-7 Initial Cal
8560 / 8570 2005356 2005300-8 Initial Cal
8460 2005355 2005300-7 Initial Cal
8590 and White 9700 / 9720 2005357 2005300-8 Initial Cal
8680 2005358 2005300-4
8780 2005359 2005300-8 Initial Cal
9690 / 9790 2005360 2005300-11 Initial Cal

Back to Top

Grain Combine Kit Installation (Overseas)

Combine Models Combine Kit PN Installation Instructions Initial Calibration Notes
Case IH
1688 2001514 2005200-2 Initial Cal
2144-2166 (1995) 2001513 2005200-3 Initial Cal
2188 (1995) 2001512 2005200-3 Initial Cal
2144 / 2166 (1996) 2001511 2005200-3 Initial Cal
2144 / 2166 / 2344 / 2366 2005515* 2005200-3 Initial Cal *South Africa Only
2188 (1996) 2001508 2005200-3 Initial Cal
2188 / 2388 (1996) 2005508* 2005200-3 Initial Cal *South Africa Only
CLAAS
96 2005501 2005300-7 Initial Cal
98 2005354 2005300-7 Initial Cal
106 / 108 2001516 2005300-7 Initial Cal
114 / 116 / 218 / 228 2001524 2005500-1 Initial Cal
203 2005507 2005300-7
204 2005506 2005300-7 Initial Cal
Don Roque
125 2001501 2005300-12 Initial Cal
150 2001502 2005300-12 Initial Cal
170 2001522 2005300-12
Gleaner
R62 / R72 2001517 2005300-4 Initial Cal
John Deere
44x5 / 11x5 2001505 2005100-8 Initial Cal
Massey Ferguson
6850 / 6855 2001504 2005300-13 Initial Cal
8450 2005354 2005300-7 Initial Cal
8460 2005355 2005300-7 Initial Cal
Metalfor
Araus 1360 2001527 2005300-14 Initial Cal
New Holland
TX 66-68 2001519 2005400-2 Initial Cal
TC 57-59 2001506 2005400-4 Initial Cal
CX 840 / 860 / 880 and CR 940 / 960 / 970 2005412 2005400-5
CS 660 2001526 2005400-6 Initial Cal
Vassalli
1200 / 1500 2001503 2005300-12 Initial Cal

Back to Top

Grass Seed Combine Kit Installation

Combine Models Combine Kit PN Installation Instructions Initial Calibration Notes
Case IH
1680 / 1688 2005205-G 2005200-2 Initial Cal
2144 / 2166 / 2344 / 2366 (1994-1995) 2005206-G 2005200-3 Initial Cal
2144 / 2166 / 2344 / 2366 (1996+) 2005210-G 2005200-3 Initial Cal
2188 (1994-1995) 2005207-G 2005200-3 Initial Cal
2188 (1996-1999) 2005212-G 2005200-3 Initial Cal
7010 / 8010 2005214-G 2005200-5 Initial Cal
John Deere
Late 8820 2005114-G 2005100-3 Initial Cal
Early 9400 / 9500 2005128-G 2005100-15 Initial Cal
9400 / 9410 / 9500 / 9510 2005122-G 2005100-7 Initial Cal
Early 9600 2005129-G 2005100-15 Initial Cal
9600 / 9610 2005123-G 2005100-7 Initial Cal
9x50 2005124-G 2005100-14 Initial Cal
9x60 2005127-G 2005100-14 Initial Cal
9x70 2005132-G 2005100-14
Massey Ferguson
750 / 760 2005352-G 2005300-6

Back to Top


Content last reviewed on: 6/6/16
Reviewed by: TMJB
Attached files
file Deere_9x50_Grass_6-04.pdf (5 kb)
file Deere_9x00_Grass_6-04.pdf (5 kb)
file CaseIH_16xx_21xx_23xx_Grass_6-04.pdf (9 kb)
file SAmerica_Don_Roque_125-150_CAL_revB_110105113627.pdf (6 kb)
file 2005300-12 South America - Don Roque, Vassalli_Dec05.pdf (255 kb)
file SAmerica_CaseIH_23XX_21XX_16XX_revA.pdf (6 kb)
file Claas_108_CAL.897.pdf (7 kb)
file MF_85x0_CAL.298.pdf (7 kb)
file 2005300-8 MF8560-90, 8780, White 9700-20.pdf (326 kb)
file MF_750-860_CAL.298.pdf (7 kb)
file 2005300-6 MF750-860.pdf (175 kb)
file 2005300-5 MF550.pdf (239 kb)
file NH_CX_CR_604.pdf (7 kb)
file 2005400-5 NH CX8x0, CR9x0_Oct05.pdf (549 kb)
file NH_OEM_TR89_TR99_CAL_2001Model.pdf (6 kb)
file NH_OEM_TR89_TR99_CAL.pdf (6 kb)
file 2005400-3 YM Ready TR89 99.pdf (255 kb)
file SAmerica_NH_TR95-98_CAL_revA.pdf (6 kb)
file NH_TR95-99_TR89_2001 Model.pdf (7 kb)
file NH_TR95-99_TR89_CAL.399.pdf (7 kb)
file NH_TR70-TR88_CAL.298.pdf (7 kb)
file 2005400-1 TR70-98, Early 89, Early 99.pdf (397 kb)
file SAmerica_NH_TC57-59_CAL_revA.pdf (6 kb)
file NH_TX66-68_CAL1.pdf (9 kb)
file 2005400-2 TX66-68.pdf (278 kb)
file Cat_570,580,590_CAL_RevA_805.pdf (7 kb)
file 2005500-5 Lexion 570, 580, 590_Feb07.pdf (687 kb)
file Cat_560,570_RevB_1005.pdf (7 kb)
file Cat_450-485_CAL.802.pdf (7 kb)
file 2005500-4 Lexion 4x0, 560, 570_Feb07.pdf (867 kb)
file Deere_9750_9760_CAL.104.pdf (7 kb)
file Deere_9650_9660_CAL.104.pdf (7 kb)
file Deere_9550_9560_CAL.104.pdf (7 kb)
file 2005100-14 JD 9x50, 9x60, 9x70_Jun09.pdf (1.12 mb)
file 2005100-7 JD Late 9X00 9X10 Oct02.pdf (366 kb)
file Deere_9400_9500_9600_New_Style_CAL.804.pdf (7 kb)
file 2005100-15 New Style JD Early 9X00 May04.pdf (494 kb)
file Deere_8820_CAL.298.pdf (8 kb)
file 2005100-3 JD 6620, 7720, 8820.pdf (242 kb)
file Deere_xx00_xx20_CAL.298.pdf (8 kb)
file Deere_3300-4420_CAL_398.pdf (6 kb)
file 2005100-1 JD 3300,4400,6600,7700,4420_Dec05.pdf (347 kb)
file Gleaner_R62R72_CAL.403.pdf (7 kb)
file 2005300-4 Gleaner R42-R72.pdf (240 kb)
file Gleaner_R40R50R52_CAL.298.pdf (7 kb)
file Gleaner_N5R70_CAL.298.pdf (7 kb)
file 2005300-3 Gleaner N5-7 R5-7 R40,R70.pdf (248 kb)
file 2005300-2 Gleaner_L2L3_M2M3.pdf (233 kb)
file Claas_98_CAL.897.pdf (7 kb)
file 2005300-7 MF8450-8460.pdf (261 kb)
file MF_9690_9790_Chlngr660_670_CAL.pdf (6 kb)
file 2005300-11_MF9690_9790_Challenger660_670_Apr03.pdf (239 kb)
file 2005200-5 CaseIH 8010 Jul05.pdf (599 kb)
file 2005200-3 CaseIH 21xx- 23xx- 25xx_Dec06.pdf (528 kb)
file CaseIH_21XX_16XX_CAL.pdf (8 kb)
file 2005200-2 CaseIH 16xx_Aug06.pdf (377 kb)
file IH 14XX_CAL.pdf (7 kb)
file 2005200-1 CaseIH 14X0-1620 Nov02.pdf (261 kb)