Customer Support
Search:     Advanced search
Sub Categories
 
folder SureDrive
folder SureForce
folder Clutch Control
SeedCommand Clutch Control
folder Population Rate Control
Seed Command Population Rate Control
folder Hydraulic Down Force
folder Population Monitoring
Seed Command Population Monitoring
folder Planter Task Controller


SeedCommand
 
document Planting Pre-Season Preparation Checklist
Planter Pre-Season Preparation Checklist
23 Oct, 2013 Views: 6813
document Planter Folding
See attachments below for illustrations of different techniques used by planter manufactures for folding and transporting toolbars.
01 Mar, 2018 Views: 818
document CAN Switchbox Connections
Ag Leader introduced a new integrated switchbox in late February 2013, PN 4000400.  It combines the Auxiliary Input Module with the analog switchbox for a cleaner installation and appearance in the cab. Externally (pictured below) it retains much of the same look and dimensions of the analog switchbox. It is available now in kit part number 4100879. The picture below highlights the equivalent connections between the CAN switchbox and the Auxiliary Input Module. You can see how they both have...
28 Feb, 2014 Views: 4837
document Implement Switch Polarity
Implement Switch Polarity
23 Oct, 2013 Views: 6059
document Q: My actual rate is jumping around, why am I not able to hold the target rate? (Control Valve Tuning)
Question: My actual rate is jumping around, why am I not able to hold the target rate? Answer: You need to make sure the controller settings match the quick reference sheet that was provided with the installation kit. Also, make sure that the Rate Display Smoothing option is checkmarked under the configuration settings for the configuration being used. Further, ensure the flow meter or encoder is operating normally. Under controller settings, the value configuration to select will be...
03 Jan, 2014 Views: 6130
document Q: How do I create a map to show where I planted different varieties?
Question: How do I create a map to show where I planted different varieties? Answer: The Ag Leader® InCommand 1200 and 800, Integra, Versa, Compass, InSight, and Edge displays offer this capability under the Planting configuration screen. Use the PF3000, Pro, or Advantage in Site Verification Mode. You’ll see the field names you use during harvest. Name the loads with the seed variety; when you start planting a different variety, just switch loads. In our SMS™ software, each load will appear...
16 Nov, 2016 Views: 6759
document Q: What equipment do I need to map varieties?
Question: What equipment do I need to map varieties? Answer: It can be as simple as getting power to the display, using GPS as your speed source, and employing the internal area-count switch as your on/off switch. For a more automated approach, mount an implement switch that will turn your area counter on when the planter is down and off when your planter is up.
23 Oct, 2013 Views: 6045
document Connecting Implement Switches to Multiple Modules
10 Nov, 2017 Views: 2209
document Implement Switch Installation John Deere Row Unit
John Deere Row Unit Implement Switch Installation PN 2006301, kit PN 4100831
04 Nov, 2013 Views: 6949
document Implement Switch Installation Kinze Row Unit
Kinze Row Unit Implement Switch Installation PN 2005993, kit PN 4100830
04 Nov, 2013 Views: 6690
document Implement Switch Installation White Row Unit
White 8000 series row unit Implement Switch Installation PN 2006302, kit PN 4100832 White 9000 series row unit Implement Switch Installation PN 2006302, kit PN 4101251
04 Mar, 2014 Views: 1855
document Implement Switch Installation Case Row Unit
Case Row Unit Implement Switch Installation PN 2006303, kit PN 4100833
04 Nov, 2013 Views: 1956
document Foam Driver Error, Flow Servo Driver Failure
Symptoms/Indications: A Foam Driver Error or Flow Servo Driver Failure is displayed on my display with a DirectCommand or SeedCommand system. Problem/Cause/Solution: A Foam Driver Error means there is a ground issue somewhere within the system. Ensure the implement ground strap is well grounded and the system shares a common ground. An example of this would be a Direct Liquid system running with Direct Injection - be sure the high current connection for the valve and boom sections are...
03 Jun, 2014 Views: 2049
document Q: Where do I find firmware for my Kinze Vision or Cobalt display?
Question: Where do I find the latest firmware for my Kinze Cobalt or Vision display? Answer: Kinze hosts these updates in their resources section found here: www.kinze.com/firmware.aspx
22 Jan, 2014 Views: 1236
document Q: When do I need a Multiple Product unlock?
Question: When do I need a Multiple Product unlock? Answer: You will need the Multi-product unlock anytime you are controlling or logging (monitoring) more than one product. With the Multiple Product unlock, the EDGE can control and/or log up to 2 products*, the Versa, 3, the InSight, 5 and the Ag Leader® Integra, 8. The InCommand 1200 can control 8 and the InCommand 800 can control 3. Some scenarios where the multiple product unlock is needed: Application product control on a planter and seed...
31 May, 2016 Views: 3362
document SeedCommand Multiple Module Line Art (Hydraulic Seed Rate / Clutch Control / Seed Tube Monitor / 2 Channel Down Force)
Items to keep in mind: Verify adequate power when adding additional modules. To add DirectCommand Liquid, begin connecting CAN A at the 2-CH Down Force CAN A Terminator. Power splitter should be on black 2-pin (Requires multiple module power cable for power PN: 4000752-12 or 4000752-3). Implement switch hierarchy is correct based on modules connected. For complete implement switch hierarchy, see this link.
22 Dec, 2017 Views: 1407